Accessories Store

This is not "bicycle chain", but instead it is a high quality, long lasting chain already cut to length for your bicycle.  Includes master link.

26 inch Thorn resistant tubes. 26 x 2.05/2.125  Comes with two tubes.

415 Chain fits MOST 2 and 4 stroke drive system. ONLY 9.99

56 tooth sprocket. This is the required sprocket for the Q-Matic drive system.

This part replaces a worn out idler arm pulley. Bearings are included.

Black bicycle chain. 1/2 x 1/8 x 112

HS142 Box Muffler and cover. ONLY 8.99

Chain guard for engine drive chain. ONLY 8.99

Chrome Exhaust Pipe including Gasket

This is the bearing that is mounted on each end of the clutch shaft.  We recommend that if you need to replace one bearing, that you replace both.  After all, they've both been the same distance!  $6.40 each

This is the entire part needed for keeping your belt tight.  Includes the spring, the bearing, and all mounting hardware.

Complete Q-Matic Drive Transmission with front pulley, belt, and all components needed to replace other brands and types. Belt cover is included.

This high quality, heavy duty center stand replaces the old "kick stand" to give you bike more stability when parked.  It helps protect mirrors, throttle controls, etc. by preventing your bike from falling so easily.

PLEASE... look at your old belt and be very careful to replace it with an exact replacement part.

PLEASE... look at your old belt and be very careful to replace it with an exact replacement part.

PLEASE... look at your old belt and be very careful to replace it with an exact replacement part.

PLEASE... look at your old belt and be very careful to replace it with an exact replacement part.

PLEASE... look at your old belt and be very careful to replace it with an exact replacement part.

This is the universal drive plate for all Q-matic drives.

Here it is, the complete EZM Kit.  Includes everything you need...and we mean EVERYTHING to motorize your bicycle.  Motor, tank, transmission, all cables, all fuel lines, even the nuts and bolts.  Not a single part is needed that is not in this kit.

We have kits that have traveled almost 15,000 miles.....TROUBLE FREE.  This entire transmission is 100% American made parts of the highest quality.  Yes...others are less expensive, but ours is smoother, quieter, and is like the famous Bunny Rabbit.  They just keep going. and going,......you know the story.

Yes, we use motors that are made outside the U.S.  But, we have literally hundreds of thousands of miles on hundreds upon hundreds of these motors....with NO problems.  No one was ever sorry they bought the best, and you won't be either.  Shop the Internet, check out the blogs, and see what everyone is talking about.  EZM.  Simply spoken...THE BEST THERE IS.

 !PLEASE CALL TO DETERMINE SHIPPING!
252-475-0406

The main clutch for the Q-matic drive.  Internal parts have been engineered and manufactured exclusively for EZ Motorbike.  An attempt to replace this clutch with any other clutch will almost certainly result in disappointment.  We do NOT recommend any other brand or version of centrifugal clutch for the EZMotorbike Q-matic drive.

The standard two inch pulley.

This is a slightly larger pulley designed for use with lower RPM motors.

Flashing red light. Attach this to the back of your bike.

Black wire basket to attach to the front of your bike.

Half link to fit bicycle chain.

Throttle control handle and right handle bar grip.

Honda Gas tank with Bracket. ONLY 15.99!!!

Honda gxh50 Box Muffler with Cover. ONLY 8.99!!

OUT OF STOCK   OUT OF STOCK   OUT OF STOCK....  

MORE ARE ON THE WAY!!

This ingenious adapter was especially designed and machined exclusively for EZ Motorbike. Using this adapter, you may now use the HS-142 tapered shaft motor on our EZ Motorbike kit!

This is the NEW inside clutch support bracket with the bearing already installed.

Master link to fit bicycle chain.

On/Off switch for HS142 ONLY 4.95!!

On/Off switch with low oil sensor for the Honda GXH50  ONLY $4.95

This is the outside shaft support bracket.  Please note that this one has holes on both sides.  It is sold with the bearing already installed

Bike pedals that fit 1/2inch crank.

Pedals to fit 9/16 crank.

Replacement belt cover comes with four snap-in clips to fasten it in place.

Just when you thought EZ Motorbike couldn't get any better, THEY GOT BETTER! Then New PACE SETTER DRIVE is here!! Not only will this drive help you accelerate faster, it will carry you up those hills you just quite couldnt make it up before. The Pace Setter is the best drive around.  The best thing about this drive is, not only does it do WONDERS for acceleration, it has almost NO effect on Top end. Leave em' in the dust and set a new pace with the newest from EZ Motorbike, The Pace Setter!!!

Adjustable tensioner makes keeping the right tension on the rear drive chain very simple.

Heavy, cast iron drive pulley used to power the clutch shaft.

This shaft is knurled to enhance it's performance and we do not recommend replacing it with a similar shaft that has not been properly prepared for use.

Black steel rear rack

Recoil starter for both the HS142 and the GXH50 motors used on the EZ Motorbike.

Black single clip alloy carrier.

This is the small bearing that is used in the idler arm that keeps your belt tight.  We recommend that they be replaced in sets of two.